****** - Verified Buyer
4.5
The cabinet arrived very well packaged with an instruction booklet, hardware, and an Allen wrench. The booklet says you will just need a Phillips screwdriver, but you will also need a drill with an appropriate bit (more on the bit later) to mount the cabinet on the wall.Assembling the cabinet was simplified by how well the cabinet pieces and hardware were labeled and referenced in the instruction booklet. The holes in all the cabinet parts lined up nicely.The doors swing on spring loaded pivots. They are not adjustable, but work well and are probably much less expensive than European style hinges. I was concerned that the doors would not line up, but they look fine.The Magnetic Latch also works well, but the little piece of wood that it mounts on fell off during assembly so I glued it back in place. This was the only problem I had assembling the cabinet. I let the glue dry overnight and mounted the cabinet the next day.The wood support plate they ship with the cabinet is a great way to hang a cabinet, however I did have some problems using the supplied anchors. I recommend having some other anchors and screws available in case you have similar issues.Skip this paragraph if you do not care about the details: I mounted the cabinet on drywall. The instructions said to drill 11/32” holes for the supplied plastic wall anchors. I did not have an 11/32” bit so I used a 5/16” bit. Even though my holes were 1/32” smaller than specified, the anchors slid into the drywall very easily without having to tap them. I recommend using a 5/16” bit or even a 9/32” bit instead of the 11/32” they specify. Next I mounted the support plate with the supplied screws, but I could not get the screws tight enough to hold the plate securely in place. It felt like the screws were too small in diameter so I used some slightly larger screws. That worked fine for one of the screws holding the plate and the two lower screws, but the second screw through the plate would not bite and hold the plate firmly. Fortunately I had one HILTI 3/16” hollow wall metal anchor left over from a previous project and was able to get the plate very solidly attached to the wall.My wife is very pleased with the cabinet. I did have some trouble with the latch and the install so I was tempted to knock off a star, but I think this is a 5-Star item considering the low cost and how well the the cabinet parts aligned with each other.
